VERTICAL ADJUSTMENT (0° to -10° in 2.5° clicks / steps)
COVER CLOSURE
Step
Description
Step
Description
1
Release locking
6
Lock
2
Adjust
7
Turn cover and push
3
Lock
8
Put back cover
4
Release locking
9
Put back cover and secure with screw
5
Adjust
10
Figure 3 - Adjustment and Cover Closure
Installation Notes:
Do not obscure the detector field of view with large objects.
2.2. Battery Insertion
It is recommended to perform the first batteries insertion on a flat surface (see Figure 4). After battery insertion, the LED will flash for 60 seconds and
then the detector will enter a 15 minutes' local diagnostic mode.
A.
Tamper switch
B.
Press firmly to release the bracket
C.
3 screws
Figure 4 – Battery Insertion
D-304046 TOWER-20 PG2 Installation Instructions
3
