P/N CWSI-IM-C3K5D Rev. H
© 2017 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision
date and are subject to change without notice
37
4.5.1 Accessing the Relay Setup screen
To access the relay setup screen, press the program soft key on the main system normal screen.
Then scroll down to Relay Setup and press ENTER. The following screen will be displayed.
Highlight the repeater to program and press ENTER. The NAC’s on the CP-3500D panel can be
programmed by selecting Control Panel. If the number of repeaters spans more than one screen
page up and page down soft keys will be present. Use the page up and page down soft keys to locate
the desired repeater then press ENTER. The following screen will be shown for the selected repeater.
The screen will show the default selections unless the selected relay has been previously modified.
The top text line indicates the serial number of the repeater and the specific relay being programmed.
S e l e c t D e v i c e t o P r o g r a m
0 0 5 c 2 8 R E P E A T E R 3 r d F l r H a l l w a y
1 d c 4 4 8 W i r e l e s s R e l a y B a s e m e n t
U s e U P D O W N t o s c r o l l t h e n p r e s s E N T E R
2 b 5 5 9 0 C o n t r o l P a n e l
R e l a y S e t u p
D e f a u l t s P r e v N e x t
R e p e a t e r 0 0 5 c 2 8 – N A C R e l a y 0 1
N
N A C R L Y 0 1 “ O n ” Z o n e s
O n # 1 O n # 2 O n # 3
Z o n e 0 0 0 0 0 0 0 0 0
U s e Z o n e s 0 0 1 - 8 9 9 F o r A l a r m s
U s e Z o n e s 9 0 0 - 9 9 9 F o r T r o u b l e s
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
N A C R L Y 0 1 “ O n / O f f ” B u t t o n s
R e l a y O n N o n e
R e l a y O f f S i g n a l S i l e n c e
Repeater
being
programmed
Relay being
programmed
Zone entry
fields
Keypad button
selections for
manually
activating and
deactivating
selected relay
