24 Port SNMP Managed Switch – User Manual
Page
6
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Console Port
The switch can be fully managed using the console port providing a direct connection
between the switch and an end station such as a PC via the supplied RS-232 cable.
LED Indicators
Figure 3. The LED Indicators
All LED indicators are located on the front panel of the 24 Port SNMP Managed Switch and
provide a real-time indication of switch and operational status. The following table details the
LED states:-
LED
Status
Description
Green
Power On
PWR
Off
Power is Off.
Green
The port is operating at the speed of 100Mbps.
100
Off
No device is attached or in 10Mbps mode
Green
The port is connected to an Ethernet device.
Blinks
The port is receiving or transmitting data
LK/ACT
Off
No device is attached
Orange
The port is operating in Full-duplex mode
Blinks
Collision of packets is occurring on the port
FD/COL
Off
No device is attached or the port is in half-duplex mode
Figure 4. Descriptions of LED Indicators
