24 Port SNMP Managed Switch – User Manual
Page
12
Product Number 0-1591058-x
© Tyco Electronics 2003
PL0351 Issue 1
Management Using The Console
Configuring the Console Interface
When the connection between Switch and PC is complete, turn on the PC and run a terminal
emulation program such as Hyper Terminal and configure its communication parameters to
match the following default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Control flow: None
Figure 6. The settings of communication parameters
Figure 7. Initial Start-Up Screen
After you have finished parameter settings, click “OK“ on the PC. When the screen shows
above, enter
root
in lower case letter for the User Name, and enter the<CR> or return key
twice. A password is required for the default
root
name the password is
root
. The Main Menu
of console management appears.
