2.4 Rack mounting
Chapter 2: Setting up
27
Note:
Ensure that the brackets with the cut
away section (to accommodate the handles
on the front of the unit) are fixed to the front
end of the rail.
3. Fully extend the sliding rails until they lock.
Note:
Do not tighten the brackets to the
rails as you will need to adjust their position
later.
4. Attach each sliding rail to the side of the GX28 as shown,
using three short, silver colored screws from the supplied
nuts, screws, and washers kit, for each rail.
5. Return the sliding rails to their shortest position.
Summary of Contents for Transport GX28 B2881
Page 1: ...Transport GX28 B2881 User s Manual Document part number D1584 100 RST 1 2...
Page 17: ...Memo...
Page 37: ...Memo...
