TYAN Transport GX28 B2881, User Manual

Page: 30 / 89

2.3 Installing a hard drive
Chapter 2: Setting up 23
5. Reinsert the drive tray into the chassis. Ensure that the
rear connector of the new drive is firmly seated in the
backplane.
Note:
The GX28 is shipped with SATA or
SCSI backplane and cables pre-installed.
2.3.2 Installing a SCSI hard disk
Note:
This section applies only to the
B2881G28U4H model. Only 80 pin SCSI
hard drives are supported.
Follow these instructions to install an external SCSI hard
drive in your GX28 system.
1. Press the drive bay locking latch in the direction of the
arrow (1) and pull the locking lever open (2) .
1
2
3
1
2
RST
1
2
3
1
2
RST
1
2