TYAN TN76-B7102 Service Manual Download Page 3 | Manualshive

Page: 3 / 180

TYAN TN76-B7102 Service Manual Download Page 3

3

http://www.tyan.com

PREFACE

Copyright

This publication, including all photographs, illustrations, and software, is
protected under international copyright laws, with all rights reserved.
Neither this manual, nor any material contained herein, may be reproduced
without written consent of manufacturer.

Copyright 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All
rights reserved.

TYAN

®

is a registered trademark of MITAC COMPUTING

TECHNOLOGY CORPORATION.

Version 1.0

Disclaimer

Information  contained  in  this  document  is  furnished  by  MITAC  COMPUTING
TECHNOLOGY  CORPORATION  and  has  been  reviewed  for  accuracy  and
reliability  prior  to  printing.  MiTAC  assumes  no  liability  whatsoever,  and
disclaims any express or implied warranty, relating to sale and/or use of TYAN

®

products  including  liability  or  warranties  relating  to  fitness  for  a  particular
purpose  or  merchantability.  MiTAC  retains  the  right  to  make  changes  to
produce  descriptions  and/or  specifications  at  any  time,  without  notice.  In  no
event  will  MiTAC  be  held  liable  for  any  direct  or  indirect,  incidental  or
consequential damage, loss of use, loss of data or other malady resulting from
errors or inaccuracies of information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.

TYAN

®

is a trademark of MITAC COMPUTING TECHNOLOGY

CORPORATION.
Intel

®

is a trademark of Intel

®

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI

Technologies.
Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

IBM

®

, PC

®

, AT

®

and PS/2

®

are trademarks of IBM Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

«
1
2
3
4
5
...
»

Summary of Contents for TN76-B7102





















































































































































































Reviews:

No comments