TYAN TN76-B7102, Service Manual, Page: 165 / 180

http://www.tyan.com
165
# of Beeps Description
1 Memory not installed
1
Memory was installed twice (installPEIMemory routine in PEI Core
called twice).
2 Recovery started
3 DXEIPL was not found.
3 DXE Core Firmware Volume was not found.
4 Recovery failed
4 S3 Resume failed
7 Reset PPI is not available.
DXE Phase
Status Code Description
0x60 DXE Core is started.
0x61 NVRAM initialization
0x62 Installation of the South Bridge Runtime Services
0x63 CPU DXE initialization is started.
0x64 CPU DXE initialization (CPU module specific)
0x65 CPU DXE initialization (CPU module specific)
0x66 CPU DXE initialization (CPU module specific)
0x67 CPU DXE initialization (CPU module specific)
0x68 PCI host bridge initialization
0x69 North Bridge DXE initialization is started.
0x6A North Bridge DXE SMM initialization is started.
0x6B North Bridge DXE initialization (North Bridge module specific)
0x6C North Bridge DXE initialization (North Bridge module specific)
0x6D North Bridge DXE initialization (North Bridge module specific)
0x6E North Bridge DXE initialization (North Bridge module specific)
0x6F North Bridge DXE initialization (North Bridge module specific)
0x70 South Bridge DXE initialization is started.
0x71 South Bridge DXE SMM initialization is started.