TYAN TN73-B8037, Service Engineer'S Manual

Page: 123 / 185

http://www.tyan.com
123
Device reset time-out
USB mass storage device Start Unit command time-out.
10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. AUTO uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
Auto / Manual
AMI Virtual CDROMO 1.00
Mass storage devices emulation type. ‘AUTO’enumerates devices according to their
media format. Optical drives are emulated as
‘CDROM’, drives with no media will be
emulated according to a drive type.
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM
6.3.13 Network Stack Configuration
Network Stack
Enable/Disable UEFI Network Stack
Enabled / Disabled