background image

                                                       

http://www.tyan.com

 

69

3.  Please also download new setting file to the target SAS Address. 

C:\Xutils\windows>g3Xutil.exe -i 500e0810000272bf down mfg 
E3250_R05.bin 3 

 
******************************************************************************** 
        g3Xutil 
    LSI SAS Expander Utility 
    Version: 6.0.0.0 
    Copyright (c) 2014 LSI Corporation.  All rights reserved. 
******************************************************************************** 
Initializing Interface. 
WARN: Ethernet Configuration Page (0xFF27) not found in flash 
Expander: E3250 (SAS_3X_24) 
      Image Validation: Passed 
                            Checksum: Passed 
              Current Version: 06.04 
   Replacement Version: 06.04 
Pre-Validation of image is successful. 
Are you sure to download file to expander?(y/n):

y

 

Downloading File..Download Complete. 
Post-validating.......Post-Validation of image is successful. 
Download Successful. 
 

4.  After firmware and setting files are downloaded into the expander, 

please reset to let TN70J-E3250 run with new firmware and new 
setting. 

C:\Xutils\windows>g3Xutil.exe -i 500e0810000272bf reset exp 

 
******************************************************************************** 
        g3Xutil 
    LSI SAS Expander Utility 
    Version: 6.0.0.0 
    Copyright (c) 2014 LSI Corporation.  All rights reserved. 
******************************************************************************** 
Initializing Interface. 
WARN: Ethernet Configuration Page (0xFF27) not found in flash 
Expander: E3250 (SAS_3X_24) 
Are you sure you want to reset Expander?(y/n):

y

 

Expander reset request successfully sent to expander. 

 

Summary of Contents for TN70J-E3250













































































Reviews: