TYAN TEMPEST I5000XT, Manual

Page: 38 / 78

38
3.3 Advanced Menu
This section facilitates configuring advanced BIOS options for your system.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
X
Hardware Monitoring
X
BIOS Event Logging
X
Advanced Chipset Control
X
Advanced Processor Options
X
Diskette Controller
X
ATA Controller
X
LSI SAS Interface
X
Integrated Network Interface
X
Integrated Audio
X
Integrated 1394:
X
Integrated USB
X
I/O Device Configuration
X
PCI Configuration
Reset Configuration Data
[Auto]
[Enable]
[No]
Hardware monitoring
configuration
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X
Sub-Menu
F10 Save and Exit
Integrated Audio
This feature is used to configure the audio controller.
Disabled / Auto
Integrated 1394
This feature is used to enable the integrated 1394 controller.
Enabled / Disabled
Reset Configuration Data
If you install a new piece of hardware or modify your computer's hardware
configuration, the BIOS will automatically detect the changes and reconfigure
the ESCD (Extended System Configuration Data). Therefore, there is usually no
need to manually force the BIOS to reconfigure the ESCD.
However, sometimes, the BIOS may not be able to detect the hardware
changes. A serious resource conflict may occur and the operating system may
not even boot as a result. This is where the Reset Configuration Data BIOS
feature comes in.
This BIOS feature allows you to manually force the BIOS to clear the previously
saved ESCD data and reconfigure the settings. All you need to do is enable this