TYAN TEMPEST I5000XT, Manual

Page: 33 / 78

33
System Memory
This display allows you to change the amount of system memory present on the system.
Extended Memory
This displays/allows you to change the amount of extended memory present on the
system.
3.2.1 IDE Channel 0/1 Setup
Computer detects IDE drive type from drive C to drive F.
Press
Enter on any of the Channel 0, Channel 1 options to view advanced
details of the corresponding drive. The system displays advanced details like
the number of heads/cylinders/sectors on the detected disk and the maximum
storage capacity of the disk.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Type:
Multi-Sector Transfers:
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
[
Auto]
[Disabled]
[Disabled]
[Disabled]
[Standard]
[Disabled]
User = your enter
parameters of hard-disk
drive installed at this
connection.
Auto = autotypes hard-
disk drive installed here.
1-39 = you select pre-
determined type of
hard-disk drive installed
here.
CD-ROM = a CD-ROM
drive is installed here.
ATAPI Removable =
removable disk drive is
installed here.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X
Sub-Menu
F10 Save and Exit
The system displays advanced details like the number of
heads/cylinders/sectors on the detected disk and the maximum storage
capacity of the disk.
This option lets you set the following hard disk parameters:
Type
Selects the type of device connected to the system.
Auto / CD/DVD / Not Installed / ARMD