TYAN TEMPEST I5000XL, Manual

Page: 18 / 81

http://www.tyan.com
18
JP5: Clear CMOS Jumper
3
1
Default
1
3
Clear
You can reset CMOS settings by using this jumper if
you have lost your system/setup password or need to
clear the system BIOS settings.
Power off the system and set JP5 to (2-3) position and
then power on the system. The CMOS will be cleared
when the POST screen is visible. Finally shut down the
power and move JP5 to its default (1-2) position and
power on the system again.
JP18: Internal Buzzer Enable/Disable Jumper
1
Close: enable internal buzzer (Default)
1
Open: disable internal buzzer
JP19: BIOS Recovery Jumper
1
BIOS will be forced into recovery. BIOS image will be
loaded from floppy.
1
(Default)
No BIOS recovery function
JP27: Reset Signal for Hardware Monitor Jumper
1
Close: write protect (Default)
1
Open: normal