TYAN TEMPEST I5000XL Manual Download Page 53

Page: 53 / 81

3.4.6 ATA Controller

This screen contains the configuration of the ATA controller.

PhoenixBIOS Setup Utility

Main

Advanced

Security Power Boot Exit

ATA Controller

Item Specific Help

Parellel ATA:
Serial ATA:
SATA Controller Mode Option:
SATA RAID Enable:
SATA AHCI Enabel:

[Enabled]
[Enabled]
[Enhanced]
[Disabled]
[Disabled]

Help

↑↓

Select Item

-/+

Change Values

Setup Defaults

Esc

Exit

←

→

Select Menu

Enter

Select

Sub-Menu

F10

Previous Values

Parallel ATA

This feature is used to enable the PATA function.

Disabled /

Enabled

Serial ATA

This feature is used to enable the SATA function.

Enabled

Disabled

SATA Controller Mode Option

This feature is used to select SATA controller mode. In “compatible mode”,
SATA and PATA drives are auto-detected and placed in Legacy mode. In
“Enhanced (non-AHCI) mode”, SATA and PATA drives are auto-detected and
placed in Native IDE mode.

Compatible

/ Enhanced (non-AHCI)

SATA RAID Enable

This item allows you to enable the SATA RAID functionality.

Disabled

Enabled

SATA AHCI Enable

This item allows you to enable the SATA AHCI functionality.

Disabled

Enabled

Summary of Contents for TEMPEST I5000XL


















































































Search results

Summary of Contents for TEMPEST I5000XL

Reviews:

Related manuals for TEMPEST I5000XL

Brands by name

Popular brands

TYAN TEMPEST I5000XL, Manual

Search results

Summary of Contents for TEMPEST I5000XL

Reviews:

Related manuals for TEMPEST I5000XL

Brands by name

Popular brands