52
http://www.TYAN.com
This BIOS feature allows you to manually force the BIOS to clear the previously
saved ESCD data and reconfigure the settings. All you need to do is enable this
BIOS feature and then reboot your computer. The new ESCD should resolve the
conflict and allow the operating system to load normally.
Please note that the BIOS will automatically reset it to the default setting of No
after reconfiguring the new ESCD. So, there is no need for you to manually
disable this feature after rebooting.
Yes /
No
Large Disk Access Mode
This option determines whether a hard drive with more than 1024 cylinders,
more than 16 heads and or more than 64 tracks per sector is present on the
system. Set this option to
DOS
if such a hard drive is present. Else, set this
option to
Other
. Virtually, all modern hard disks have these characters so leave
this option at
DOS
, unless you know otherwise.
DOS
/ Other
Integrated IEEE 1394
This feature allows you to enable / disable IEEE 1394 port.
Enable
/ Disable
Legacy USB Support
When enabled, the BIOS takes control of the USB ports. Enable this only if you
run an OS that does not support USB (e.g. DOS) or when you have USB
hardware like USB mice that you want to use even before the operating system
loads.
Enabled
/ Disabled
Option ROM Placement
When enabled, the BIOS takes control of the ROM Placement. Enable this if
your system hangs during boot. Please restart the system and come here ot
change the setting.
Disabled
/ E000 Extension by PFA / Temporary Relocation by PFA /
E000 Extension by Size / Temporary Relocation by
Size
