http://www.TYAN.com
17
2.4.9 – Clear CMOS Jumper (JP10)
Pin_3
Pin_1
Normal
Pin_3
Pin_1
Clear
You can reset the CMOS settings by using
this jumper if you have forgotten your
system/setup password or need to clear
system BIOS setting.
-
Power off system and
disconnect
both power connectors from the
motherboard
-
Use jumper cap to close Pin_2 and
Pin_3 for several seconds to Clear
CMOS
-
Put jumper cap back to Pin_1 and
Pin_2 (default setting)
Reconnect power & power on system
2.4.10 – LAN3 / LAN4 / LAN1 / LAN2 Enable / Disable Jumper (JP3, JP4, JP7, JP8)
Pin_3
Pin_1
Normal
Pin_3
Pin_1
Disable
Jumper
Pin_1
Pin_2
Pin_3
JP3
GPIO
LAN3_Disable#
GND
JP4
GPIO
LAN4_Disable#
GND
JP7
GPIO
LAN1_Disable#
GND
JP8
GPIO
LAN2_Disable#
GND
Note: JP3, JP4 are optional.
