Step 4-1.
If the mainboard does not support 2x3-pin
LCM header, make sure to connect the
LCM signals to the COM port.
NOTE: Pin #2-3 of JP1 and JP2 should
be closed.
Step 4-2.
Connect one end of the CCBL-0600 cable
to J15 on the M1010/M1012. Locate the
power cord P5.
Step 4-4.
Locate the COM2 header on the main-
board. The location of COM2 may vary
from model to model. Use the CCBL-
0602 LCM cable to connect COM2 and
J16 on M1010/M1012.
Step 4-3.
the other end of the CCBL-0600 cable
and the P5 power cord go through the
lower hard disk chamber. The CCBL-
0600 cable connects to J3 and the P5
power cord connects to J6 on the LCM
module.
Option 2 Configuring New Setting
J6
P5
J15
J3
J16
COM2 header
70
