TYAN Tank GT20 (B5372-LC), Service Manual

Page: 62 / 80

54 Chapter 3: Replacing Pre-Installed Components
3.8 Replacing the SATA Backplane
1. After removing the M1012 adapter board, disconnect
those cables connected to the SATA backplane, including
SATA and power cables.
2. Grab the two tabs to lift the SATA backplane off.
3. Remove ten screws that secure the bracket to the
adapter board.
4. Release the adapter board free from the bracket.
5. After replacement, place and secure the unit into the
chassis following the reverse procedures from Step 1 to
Step 4.