http://www.TYAN.com
29
Memory Installation Procedure
Ensure to unplug the power supply before adding or removing DIMMs or
other system components, Failure to do so may cause severe damage to
both the motherboard and the components.
Follow these instructions to install memory modules into the S8028.
1. Unlock a DIMM socket by Press the retaining clip outwardly in the following
illustration.
2. Align the memory module with the socket. The memory module is keyed to fit
only one way in the socket.
3. Hold the DIMM by both of its ends . Insert the module vertically into the
socket . Apply force to both ends of the DIMM simultaneously until the retaining
clip pop up into place. And the DIMM cannot be pushed in any further to ensure
proper sitting of the DIMM
。
KEY SLOT
Unlocked
retaining
clip
Unlocked
retaining clip
DIMM NOTCH
