TYAN S8020, Manual

Page: 110 / 168

http://www.tyan.com
110
TpProcMemPmuAfterFirmwareLoad
= 0xE015, ///< ABL Mem - PMU -
After PMU Firmware load
TpProcMemPmuPopulateSramTimin
gs
= 0xE016, ///< ABL Mem - PMU
Populate SRAM Timing
TpProcMemPmuPopulateSramConfi
g
= 0xE017, ///< ABL Mem - PMU
Populate SRAM Config
TpProcMemPmuWriteSramMsgBlock
= 0xE018, ///< ABL Mem - PMU Write
SRAM Msg Block
TpProcMemPmuWaitForPhyCalCom
plete = 0xE019, ///< ABL Mem - Wait for Phy
Cal Complete
TpProcMemPmuPhyCalComplete
= 0xE01A, ///< ABL Mem - Phy Cal
Complete
TpProcMemPmuStart = 0xE01B, ///< ABL Mem - PMU Start
TpProcMemPmuStarted = 0xE01C, ///< ABL Mem - PMU Started
TpProcMemPmuWaitingForComplete
= 0xE01D, ///< ABL Mem - PMU
Waiting for Complete
TpProcMemPmuStageDevInit
= 0xE01E, ///< ABL Mem - PMU Stage
Dec Init
TpProcMemPmuStageTrainWrLvl
= 0xE01F, ///< ABL Mem - PMU Stage
Training Wr Lvl
TpProcMemPmuStageTrainRxEn
= 0xE020, ///< ABL Mem - PMU Stage
Training Rx En
TpProcMemPmuStageTrainRdDqs1
D
= 0xE021, ///< ABL Mem - PMU
Stage Training Rd Dqs
TpProcMemPmuStageTrainRd2D
= 0xE022, ///< ABL Mem - PMU Stage
Traning Rd 2D
TpProcMemPmuStageTrainWr2D
= 0xE023, ///< ABL Mem - PMU Stage
Training Wr 2D
TpProcMemPmuStagePMUQEmpty
= 0xE024, ///< ABL Mem - PMU
Queue Empty
TpProcMemPmuUSMsgStart
= 0xE025, ///< ABL Mem - PMU US
message Start
TpProcMemPmuUSMsgEnd
= 0xE026, ///< ABL Mem - PMU US
message End
TpProcMemPmuComplete = 0xE027, ///< ABL Mem - PMU
Complete
TpProcMemAfterPmuTraining = 0xE028, ///< ABL Mem - PMU - After
PMU Training
TpProcMemBeforeDisablePmu
= 0xE029, ///< ABL Mem - PMU - Before
Disable PMU
//Original Post code
TpProcMemTransmitDqsTraining
ProcMemTransmitDqsTraining = 0xE02A, ///< ABL Mem -