TYAN S7052, Manual

Page: 46 / 114

http://www.tyan.com
46
2.11 Installing the Power Supply
There are
three (3)
power connectors on your S7052 motherboard. The S7052
supports EPS 12V power supply.
J53: ATX 24-Pin Power Connector
Signal Pin Pin Signal
+3.3V
1 13
+12V
+3.3V
2 14
+3.3V
GND
3 15
GND
+5V
4 16
PS-ON#
GND
5 17
GND
+5V
6 18
GND
GND
7 19
GND
PWR OK
8 20
RES
5VSB
9 21
+5V
+12V
10 22
+5V
+12V
11 23
+5V
+3.3V
12 24
GND
PWRCONN3 (J64) / PWRNCONN4 (J2): SSI 8-Pin CPU Power Connector
Signal Pin Pin Signal
GND
1 2
GND
GND
3 4
GND
+12V
5 6
+12V
+12V
7 8
+12V
NOTE:
You must unplug the power supply before plugging the power
cables to motherboard connectors.
2.12 Finishing Up
Congratulations on making it this far! You have finished setting up the hardware
aspect of your computer. Before closing up your chassis, make sure that all cables
and wires are connected properly, especially IDE cables and most importantly,
jumpers. You may have difficulty powering on your system if the motherboard
jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by
asking your vendor for assistance. If they are not available for assistance, please
find setup information and documentation online at our website or by calling your
vendor’s support line.