TYAN S5377, Manual

Page: 25 / 77

25
2.9 - Installing Optional SO-DIMM modules
Your S5377 motherboard is equipped with an optional proprietary SO-DIMM
connector. The 200-pin vertical SO-DIMM connector can be used for
TYAN
M3295/M3296-2 expansion card to provide such features as additional TYAN
SMDC module support. For details of available expansions cards, visit the
TYAN website at
.
To install a SO-DIMM expansion card:
1. Open the spring levers as shown.
2. Insert the SO-DIMM card as shown,
making sure that the card is the
right way up. The card will fit in
only one way and the screw holes
in the card should line up exactly
with the mounting posts on the
motherboard.
3. Push the SO-DIMM card down into
place and make sure the spring
levers click into place as shown.
NOTE: The SO-DIMM expansion
cards will fit in the slot only one
way. Make sure that you align the
slot in the card with the key in the
card slot.
4. Removal of a SO-DIMM card is a
reversal of the installation
procedure. Push out the spring
levers as shown and pull the card
out of the socket.