TYAN S5372-LH, User Manual

Page: 38 / 78

38
If enabled, the BIOS will shorten the booting process by skipping some tests
and shortening others. In addition, it will also perform the following to further
speed up the booting process:
Spin up the hard disks as soon as power is supplied (or as soon as
possible)
Initialize only critical parts of the chipset
Read memory size from the SPD (Serial Presence Detect) chip on the
memory modules
Eliminate logo delays
If disabled, the BIOS will run the whole gamut of boot-up tests.
It is recommended that you disable this feature when you boot up a new
computer for the first time or whenever you install a new piece of hardware.
This allows the BIOS to run full diagnostic tests to detect any problems that may
slip past Quick Boot’s abbreviated testing scheme.
After a few error-free test runs, you should enable this feature for much faster
booting.
Enabled / Disabled
POST Delay Time
This item will set delay time before option ROM scan.
No Delay / 40 Sec / 60 Sec / 80 Sec / 100 Sec / 120 Sec / 140 Sec /
160 Sec
Extended Memory Testing
Determines the tests that will be run on extended memory (memory above 1MB)
during boot up.
Normal / Just zero it / None