background image

 

 

             

 

             http://www.tyan.com 

 

 

          

52 

3.5.7 – Event Logging details Sub-Menu 

 

You can use this screen to view the Event Log Control Menu. This logs 

system events (such as CMOS clear, ECC memory errors, etc) and writes the 
log into NVRAM. Use the up and down arrow (

á

/

â

) keys to select an item. Use 

the Plus and Minus (+/-) keys to change the value of the selected option. The 
settings are described on the following pages.

 

 

BIOS Setup Utility 

Main      

Advanced

      PCI/PnP      Boot       Security       Chipset       Exit 

  

Event Logging details 

  
 

View Event Log 

Mark All Events as Read 
Clear Event Log 
Event Log Statistics  
 

 
View all unread events 
on the Event Log. 
 
 

 

 Select Screen 

↑↓

 Select Item 

+/-     Change Option 
Enter Go to Sub Screen 
F1     General Help 
F10   Save and Exit 
ESC  Exit 
 

 
 

Feature 

Option 

Description 

Event Logging details 

View Event Log 

 

Views all unread events on the 
Event Log. 

OK 

Mark All Events as Read

 

Cancel 

Marks all unread events as 
read. 

OK 

Clear Event Log 

Cancel 

Erases all of events. 

Event Log Statistics  

 

View details on the count of 
total unread events.  Other 
stats include size occupied and 
size free. (in terms of event 
units) 

 

Summary of Contents for S3892






















































































































Reviews: