background image

 

             

 

             http://www.tyan.com 

 

 

          

72 

 

Appendix: SMDC Information 

 
Overview 
 

Tyan Server Management Daughter Card (SMDC) is a powerful yet cost-
efficient solution for high-end server management hardware packages. Tyan’s 
goal is to provide remote system monitoring and control even when the 
operating system is absence or simply fails. This empowers Tyan’s server 
board with advanced industrial-standard features. 
 
Tyan SMDC is a snap-in card that provides essential server management 
solution. It enables any IT Manager by providing multi-interfaces to access the 
hardware remotely and perform 

monitor

control

 and 

diagnose

 activities 

effectively. 
 
Tyan SMDC is not a peripheral card. Unlike regular peripheral card such as 
AGP card, Network card or SCSI card, SMDC does not require any hardware 
specific driver. As long as a standby power comes into the system, SMDC will 
begin looking after the system. 
 
Tyan SMDC provides diversified methods to communicate with the hardware. IT 
manager has the flexibility to choose among 

Keyboard Controller Style

 (KCS), 

Block Transfer

 (BT) style, Intelligent Chassis Management Bus (ICMB), 

Intelligent Platform Management Bus (IPMB), Emergency Management Port 
(EMP) and standard IPMI-Over-LAN communication as defined in latest IPMI 
1.5 specification. 
 
Tyan SMDC is compatible with all IPMI-compliance software as well as Tyan 
System Operator

TM

 (TSO) software package. 

 
By adding SMDC, Tyan’s server board becomes a highly manageable and IPMI 
compatible system with all the advanced features suggesting in IPMI Spec. 
 
More detailed information on Tyan’s SMDC card can be found on our website: 

http://www.tyan.com

 

 
 
 
 
 
 
 
 
 
 

Summary of Contents for S2866


















































































Reviews: