TYAN S2727 Manual Download Page 5 | Manualshive

Page: 5 / 53

background image

5

http://www.TYAN.com

Integrated I/O

• One floppy connector supports up to two drives
• Two 9-pin 16550-based serial ports

(COM2 via an optional cable)

• One 25-pin SPP/ECP/EPP parallel port header
• Four USB ports (2 rear connectors and 2 front

side USB headers for an optional cable)

• PS/2 keyboard and mouse connetors

System Management

• Winbond W83782D or optional ADI ADM1027
• Total six 3-pin fan headers with tachometer
monitoring
• Three 3-pin fan headers and PWM control
• 2-pin chassis intrusion header
• Temperature and voltage monitoring
• Watchdog timer

BIOS

• AMI BIOS on 4Mbit Flash ROM
• Supports ACPI

• Auto detection of memory size
• Auto configuration of IDE hard drive types
• Multiple boot options
• User settings of hardware monitoring
• Power Management: ACPI S1, S4, and S5

Form Factor

• Standard ATX 2.03 (12” x 9.6”), 6-layer PCB

• ATX12V/EPS12V power connector
• Stacked Mouse/Keyboard Ports
• Stacked USB (two) connectors
• One serial connector and one VGA connector

• Two RJ-45 side-by-side connectors with
LEDs (S2727GN version has only one RJ-45.)

Regulatory

• FCC DoC (Declaration of Conformity)
• European CE (Declaration of Conformity)

Hyper-Threading Support In:

Windows 2000 Server
Windows 2000 Advanced Server
Windows XP Pro
Windows NT 4.0 Server
Linux (Kernel 2.4.18)
Novell Netware 6 with Support Pack 1

TYAN reserves the right to add support or
discontinue support for any OS with or
without notice.

«
...
3
4
5
6
7
...
»

Summary of Contents for S2727






















































Reviews:

No comments

Related manuals for S2727

Brand: Acer Pages: 12

Brand: Digital Equipment Pages: 98

Brand: PC Partner Pages: 20

ML501MicroBlaze

Brand: Xilinx Pages: 46

AN003 MPT11210IL

Brand: Modular Pages: 9

GeForce 8300 (MI-A78U-8309)

Brand: XFX Pages: 26

Brand: MSI Pages: 91

Brand: TYAN Pages: 90

Brand: JETWAY Pages: 47

AN-1966 LMH2190

Brand: Texas Instruments Pages: 11

Brand: Daewoo Pages: 39

Brand: Gigabyte Pages: 53

Brand: IBASE Technology Pages: 78

z75a-g45 series

Brand: MSI Pages: 88

LANParty Jr. GF9400 T2RS

Brand: DFI Pages: 138

Brand: Yamaha Pages: 92

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 110

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands