background image

http://www.tyan.com

4

Chapter 1

Introduction

Overview

The Tomcat i810ef is a quality, high performance motherboard designed for

Socket 370 Intel Celeron / Pentium III microprocessors. The Tomcat i810ef

utilizes the Intel i810ef Chipset with AMI BIOS and can support Celeron /

Pentium III CPU speeds of 300MHz through 800+ MHz, and host bus speeds

of 66MHz to 133MHz.  For CPU speed support,  please refer to the CPU

Compatibility Chart on Tyan’s website:

http://www.tyan.com/support/html/pentiumii_iii_ppga.html

The Tomcat i810ef motherboard provides high performance capabilities that

are ideal for a wide range of demanding applications such as CAD, CAM,

CAE, desktop publishing, 3D animation, and video production.

This integrated high-performance system board in a Flex-ATX form factor

offers more features and expandability than other Flex-ATX boards in its class.

Some of the features included are onboard UltraDMA / 66, 133 MHz Front Side

BUS Speed, onboard digital link sound with AC’97 Codec, onboard VGA port,

built-in Intel 3D Graphics accelerator and onboard 4MB 133 MHz display

cache for enhanced graphics performance.

chapter 

1

Introduction

Summary of Contents for S2420










































































Reviews: