S2420 Tomcat i810ef
27
Connecting Com and Printer Ports
Warning:
When plugging in your keyboard and mouse, or when plugging
anything into a serial or Com port, make sure that the power is off. Connecting
these devices and ports while the power is on is called hot plugging, and may
damage your system. Note: Only Tyan cables will work on this motherboard. If
you are using an existing case with old cables, your system may not function
properly. Use only Tyan-approved cables.
8. Connecting the Power Supply
The Tomcat i810ef requires an ATX power supply. Tyan recommends using one
that conforms to industry standard revision 2.01. The photos below show the
ATX power connector before (
Figure 2-12
) and after (
Figure 2-13
) it has been
plugged in. The plastic clip on the power connector should lock over the plastic
tab on the onboard connector. You shouldnt be able to plug the power connec-
tor in any other way but just to be safe, make sure it looks like
Figure 2-13
.
*Note:
The images above is used to illustrate a concept and may not represent the actual
image of your motherboard.
INST
A
LL
Figure 2-13*
Figure 2-12
warning
