S2390 Trinity KT
55
User Password (Supervisor / User)
When you select this function, a message appears at the center of the screen:
ENTER PASSWORD:
Type the password, up to eight characters, and press <Enter>. Typing a password
clears any previously entered password from CMOS memory. Now the message
changes:
CONFIRM PASSWORD:
Again, type the password and press <Enter>. To abort the process at any time, press
<Esc>.
In the Security Option item in the Advanced BIOS Features Setup screen, select
System or Setup:
Note: To clear the password, simply press <Enter> when asked to enter a password.
Then the password function is disabled.
Flash Utility
Note: You will need to visit the Tyan web site at
http://www.tyan.com
in order to get
the Flash Utility.
For more information and updates about the Flash Utilities, check the Tyan web site at
http://www.tyan.com
To flash the BIOS do this:
i.
Boot system to DOS (make sure you are not under Windows;
check your Windows documentation for details on how to
boot to DOS only).
ii.
Type flash4mb followed by <ENTER> key.
iii.
To save or not save the old BIOS is up to you.
iv.
Type in the BIOS filename, like BIOSFILE.ROM.
v.
Flash Utility will auto-complete the flash, including boot block
at this point.
vi.
Shutdown the system. Then restart the system.
NOTE: Please be aware that by flashing your BIOS, you agree that in the event
of a BIOS flash failure, you must contact your dealer for a replacement BIOS.
There are no exceptions. Tyan does not have a policy of replacing BIOS chips
directly with end users. In no event will Tyan be held responsible for damage
done to the BIOS by the end user.
!
important!
