TYAN S2380 Trinity K7 Manual Download

Page: 30 / 72

http://www.tyan.com

BIOS Configuration

Introduction to Setup

This manual describes the Award BIOS Setup program. The Setup program lets

you modify basic system configuration settings. The settings are then stored

in a dedicated battery-backed memory, called NVRAM, that retains the

information when the power is turned off.

The Award BIOS in your computer is a customized version of an industry-

standard BIOS for IBM PC ATcompatible personal computers. It supports

AMD Athlon K7 and compatible processors. The BIOS provides critical low-

level support for the system central processing, memory, and I/O subsystems.

The Award BIOS has been customized by adding important, but nonstandard,

features such as virus and password protection, power management, and

detailed fine-tuning of the chipset controlling the system. The rest of this

manual is intended to guide you through the process of configuring your

system using Setup.

Chapter 3

BIOS Configuration

chapter

The BIOS section of the manual is subjected to change without notice and is

provided here for reference purposes only. The settings and configurations

of the BIOS are current at the time of print, although they may not be exactly

the same as that displayed on your screen.

important!

Summary of Contents for S2380 Trinity K7









































































Search results

Summary of Contents for S2380 Trinity K7

Reviews:

Related manuals for S2380 Trinity K7

Brands by name

Popular brands

TYAN S2380 Trinity K7, Manual

Search results

Summary of Contents for S2380 Trinity K7

Reviews:

Related manuals for S2380 Trinity K7

Brands by name

Popular brands