TYAN S2380 Trinity K7 Manual Download Page 16

Page: 16 / 72

http://www.tyan.com

Chapter 2

Board Installation

1-H Hardware Reset Switch Connector Installation

The Reset switch on your cases display panel provides you with the Hard-

ware Reset function, which is the same as power on/off. The system will do a

cold start after the Reset button is pushed. (J1 pin 5 & 7)

1-I Onboard Sound audio Connectors (Video-In and CD-IN)

There are two 4-pin connectors onboard which are used for various peripher-

als audio signals. The digital signal that comes in through these connectors is

directed through the VIA KX-133 onboard sound function, and the digital

signal is turned into an audio signal which goes out through the speaker. This

consists of the VIDEO-IN connector for DVD drives and the CD-IN connector

is for CD-ROMs.

1-M. USB Header (Jumper

J2)

The Southbridge of the KX-133

chipset is capable of handling 4

USB ports. Only 2 connectors are

provided on the motherboard. If

you need to use all four ports, a

USB header (J2) is provided should

you decide to set up a USB

connector externally.

1-K Power LED Connector

(Jumper JP22)

Jumper JP22 is a three pin power LED header that can be used if you have a 3

pin Power LED. Otherwise refer to panel connector J16 for 2 pin LEDs. 3 pin

LEDs can still be used on J1 where pin 13 would be for the Ground pin.

Suspend to RAM ACPI Enable/Disable (Jumper JP18)

This jumper controls the ACPI advanced power management function . Set

the jumper JP18 to 1-2 to enable ACPI or set the jumper to 2-3 to turn the ACPI

function off. Default is OFF (2-3). ACPI must also be enabled in the BIOS in

order for this function to be activated. If ACPI is not enabled, the Sleep

Button (Jumper J24) will not function.

JP21

(Clr CMOS)

WOM

WOL

J2 (USB)

JP18

JP22/ JP24

JP1

Summary of Contents for S2380 Trinity K7









































































Search results

Summary of Contents for S2380 Trinity K7

Reviews:

Related manuals for S2380 Trinity K7

Brands by name

Popular brands

TYAN S2380 Trinity K7, Manual

Search results

Summary of Contents for S2380 Trinity K7

Reviews:

Related manuals for S2380 Trinity K7

Brands by name

Popular brands