background image

S2060  Tomcat i815e

39

BIOS

Chipset Menu

The Chipset Setup is for advanced configuration of the motherboard attributes. There
are also two sub screens available (denoted by the      symbol).

GMCH Configuration

The graphics chipset can be configured in the GMCH sub screen.

Processor Serial  Num ber

Identifies the CPU.

CPU Frequency

Sets the ratio for the CPU frequency. [Default is 

1:2

]

CPU Latency Tim er

Reserved for debugging. [Default is 

Disabled

]

C000 - C4000, 16k Shadow

Specifies how  the 16k of Video ROM is treated at the 
listed address.                                                        
Disabled: contents of video ROM are not copied to 
RAM.                                                                                 
Enabled: contents of video ROM at listed address 
segment is copied (shadow ed) from ROM to RAM for 
faster execution.                                                              
Cached / WP: contents of video ROM from listed 
address segment are copied from ROM to RAM and 
can be w ritten to or read from cache memory. [Default 
is 

Cached/WP

]

C800 - DC00, 16k shadow

[Default is 

Cached/WP

]

Prim ary Video Device

Sets the primary device for video output. [Default is Auto]

Internal Graphics Mode Select

Enables / disables the internal video device. [Def ault is 
Enabled, 1MB]

Display Cache Window  Size

Specifies amount of cache available for the graphics local 
memory w indow . [Default is 64MB]

Display VBIOS Message

Enable / disable video BIOS message. [Default is Enabled]

Internal Graphics Scaling

Sets scaling for internal video device. [Default is Auto]

Internal Graphics TV Form at

Sets TV video standard (depends on your country 
location). [Default is NTSC]

Output Device Sync / Non-sync

Sets this depending on your video monitor. See your 
monitor documentation for details. [Default is Non-
Synchronous]

Digital Device Priority

Sets order of priority for video output devices. [Default is 
CRT / FP / TV]

AGP Graphics Aperture Size

Sets maximum memory aperture for onboard AGP port. 
[Default is 64MB]

Init Display Cache Mem ory

If enabled, the display cache w ill be initialized at time of 
system boot. See the table on the next page for more 
details. [Default is Enabled]

Summary of Contents for S2060



























































Reviews: