S2060 Tomcat i815e
11
procedure
1.
2.
3.
INST
ALL
Here are some precautions you should follow when installing your motherboard:
(1)
Ground yourself properly before removing your motherboard
from the antistatic bag.
Unplug the power from your computer
and then touch any unpainted metal part on the computer case.
(Or wear a grounded static safety wrist strap.)
(2)
Hold the motherboard by its edges and do not touch the bottom of
the board.
(3)
Avoid touching motherboard components, IC chips, connectors,
and leads.
(4)
Avoid touching pins of memory modules and chips.
(5)
Place motherboard on a grounded antistatic surface or on the
antistatic bag.
Having reviewed the precautions above, the next step is to take the motherboard out of
the cardboard box and static bag, hold it by its edges, and place it on a grounded
antistatic surface, component side up. Inspect the board for damage.
DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED!
Press down on any of the socket ICs if it appears that they are not properly seated
(the board should still be on an antistatic mat). Do not touch the bottom of the board.
Remember, don’t take any electronic device out of its protective bag until you are
ready to actually install it into the computer case. If you do not ground yourself, you
risk zapping the motherboard or adapter card. Subsequent problems may not arise
immediately because electrostatic discharge damage unlike physical damage, causes the
device to fail over time.
Installation Steps
1. Set Jumpers
2. Mount Motherboard in Chassis
3. Install Memory
4. Install CPU & Cooling Fan
5. Connect IDE and Floppy Drives
6. Install Add-on Cards
7. Connect PS/2, USB, Ethernet (optional), Serial and Parallel Devices
8. Connect Power Supply
!
important!
