http://www.tyan.com
40
Chapter 2
Board Installation
Make sure that you are following the proper instructions for your operating
system (e.g. if you are using Windows 95 or 98, do not follow the Windows NT
instructions).
DOS Setup for Novell NetWare Clients
Automatic configuration
PCI computers automatically detect and configure PCI-compliant adapters
while booting. The Intel 82559-based Integrated Fast Ethernet For WfM
adapter IRQ level and I/O memory address are automatically set by the BIOS
each time you start your computer.
Start your computer to automatically configure the adapter. Configuration is
complete when the DOS prompt appears. You can now continue with the
procedure below.
Run Setup to install network drivers
Setup can automatically install NetWare DOS ODI client drivers for you or
display a README file with installation instructions for other NOS drivers.
1. If your computer already has network drivers installed, restart the computer
without loading them. If the drivers are loaded from the AUTOEXEC.BAT or
CONFIG.SYS file, type REM in front of each line that loads a network driver.
Or, with DOS 6.x or later press 5 as DOS starts, to bypass the drivers.
2. Insert the Intel Configuration and Drivers floppy/CD in a drive, switch to
the appropriate drive/directory, and at the DOS prompt, type SETUP.
3. If you have more than one Intel PRO series PCI adapter in your computer,
an adapter selection menu appears on the screen. Select the adapter you
want by noting the Ethernet address. See “Installing Multiple Adapters” for
more information.
4. Select Automatic Setup from the Main menu. Then follow the instructions
on the screen. (If you want to test the adapter with a responder on the
network, see the next procedure.) Setup displays the adapter’s configura
tion, then runs a series of diagnostic tests that makes sure the adapter and
network are functioning properly. If Setup finds a problem, it displays the
results and some possible solutions.
5. When Setup finishes the tests, you’ll see the Install Network Drivers
screen.
6. Select the driver you want to install. Setup can install a NetWare client
procedure
1.
2.
3.
