Laser Welding Machine
Address: 18 South Liu Fang Yuan Road,Sintec Industrial Park, Wuhan Hubei, 430205 PR China
Tel: 0086 27 65523998 Mobile/WhatsApp/Wechat:0086-17371095681
Web:http://www.txtlaser.com/ ; E-mail: [email protected]
第
36
页
（
5
）
Check whether the protective cover of the gun tip is removed, and ensure
that the surface of the protective lens is clean
（
6
）
Before turning on the power, please check carefully that the electric
control panel and the control cabinet should be closed firmly, the electrical
lines should be well connected, and the grounding should be good.
（
7
）
You should be very familiar with the location of the emergency stop button
so that you can press it whenever you need it without looking for it.
（
8
）
Personnel without professional training shall not be allowed to connect the
power supply and operate the equipment.
3. Do it seriously at work:
（
1
）
Stick to your post, operate meticulously, and do not do anything unrelated
to your work. Turn off the power when leaving the device for any reason.
（
2
）
Process according to process regulations. It is not allowed to arbitrarily
modify the process parameters, laser power, frequency, width, etc.
（
3
）
During the processing of the equipment, other irrelevant personnel should
not enter the working area.
（
4
）
It is not allowed to disassemble the safety protection device on the
equipment without authorization, and the equipment without the safety
protection device is not allowed to work.
（
5
）
Always remove dust and oil from the equipment and keep it clean.
（
6
）
Pay close attention to the operation of the equipment. If you find abnormal
phenomena such as malfunction, vibration, heat, noise, odor, bumps, etc., you
should immediately shut down the machine for inspection, and continue to
work after troubleshooting.
（
7
）
When an equipment accident occurs, press the emergency stop button
immediately, keep the accident scene, and report to the relevant departments
