Problem
The stylus is not responding properly.
Solution
The screen is not calibrated correctly to interpret the screen taps. You need to
recalibrate the screen.
Problem
The JETT•RFID acts slowly.
Solutions
The unit may be short of program memory or storage memory.
Increase the amount of storage or program memory through the System control in
the Control Panel.
You can also delete any unnecessary files.
Problem
I get little or no sound from the JETT•RFID
.
Solution
Adjust the volume and sound properties
via the Volume and Sound control in the
Control Panel.
Problem
The JETT•RFID does not recognize a compact flash or device card.
Solution
The card is not installed or seated properly.
Reinstall the card. There may be an unstable connection between the card and the
JETT•RFID.
Remove the card, clean the edge connector with a soft dry cloth, and reinstall the
card.
Problem
The JETT•RFID goes into auto-suspend after a short period of inactivity.
Solution
As a default, the device will auto-suspend after two minutes of inactivity while
running on batteries and after thirty minutes of inactivity when running on AC
power.
Adjust the power management properties
via the Power control in the Control
Panel.
Problem
No sound is heard when you tap the touch screen or press a key.
Solution
Volume setting is low or turned off.
Check the volume slider in the Volume & Sound properties dialog box in the
Control Panel.
Troubleshooting
6-2
