Using ActiveSync
To download applications to the JETT•RFID’s flash memory requires Microsoft ActiveSync 3.7 and a
serial connection between the JETT•RFID and the JETT•RFID Development System.
If you have a version of Microsoft ActiveSync earlier than version 3.7, you should remove the program
from the development system before installing ActiveSync 3.7. If you have a version of ActiveSync
installed, but unsure of the version, start the program and select
About Microsoft ActiveSync
from the
Help menu.
Initial Communication
To setup initial communication between the development system and the JETT•RFID:
1.
Connect the JETT•RFID interface cable to an available COM port on the development system
and the COM 1 port of the JETT•RFID.
2.
On the JETT•RFID, tap
Start
and then select
Programs > Communications > PC Link
.
The following message box appears:
3.
On the development system, start ActiveSync.
4.
From the File menu, select
Get Connected
. The ActiveSync Get Connected dialog box opens.
5.
Click
Next
. ActiveSync will then attempt to connect to the JETT•RFID.
JETT•RFID Technical Reference Manual, MAN0339, Rev. A, Preliminary
3-11