7.
REVERB SEND
- The reverb send control determines the amount of signal applied to the
reverb tank. Low settings will create short decay times. Advancing the control clockwise increases
the signal applied to the tank for longer decay times. Use this control in conjunction with the
REVERB
(front panel) control.
8.
S/N
- Your serial number is located here. We strongly suggest that you record this number and
have it handy in case you need service, or in the event that your amp is lost, stolen, or damaged.
9
. FOOT SWITCH
- The footswitch connects here with the included stereo TRS cable. The LEAD
and BYPASS functions can be activated via the footswitch. Front panel switches must be in the
down position for the foot switch to function.
FUSE CHART
Fuse Chart: All Fuses are 3AG Type 250 Volt SLO-BLO
100V
120V 220/230/240
40 and 50 Watt:
2.5amp
2.5amp
1.6amp
100 Watt:
3.2amp
3.2amp
2.5amp
FOOTSWITCH
LEAD
(BLUE)
- Switches amp into overdrive mode
BYPASS (RED)
- Switches amp into a tone stack bypass mode
