14.
REVERB
– This is a reverb return control. This is the amount of reverb signal returning from
the spring tank. At full counter-clockwise rotation, the reverb effect is defeated. Using the return
control (back panel) in conjunction with this reverb send control, a wide range of natural reverb
effects can be produced.
15.
MASTER
- Adjusts the overall output level of the amplifier. Both the clean and overdrive output
is controlled by this level. This level will also control how much signal is passed to any pedal
that is inserted into the effects loop.
16.
PRESENCE
- Adjusts the contour of high-frequency response. The high-frequency response
will increase as you advance the control clockwise.
17.
STANDBY
- Should be in the “
STANDBY
” position when you apply power to the unit. After a
few seconds, place the switch in the “
ON
” position to use the amplifier. You may leave the unit
“powered up” and place this switch in the “
STANDBY
” position to mute the output.
18.
INDICATOR LAMP
- This lamp will illuminate when the power switch is in the “up” position,
indicating the unit is receiving A/C power.
NOTE: All switches are
ON
in the “up” position
