2018/07/25 19:55
15/32
Torpedo Live User's Manual
User's manuals - http://wiki.two-notes.com/
and share your experience on the Two Notes Audio Engineering Forum or social networks. Please go
to the
Two notes Audio Engineering
website and click on the “Community” section.
Two notes is also on the social networks
,
Soundcloud
and
Youtube
— so do not wait and
come share your creative work!
Configuring and using the Torpedo Live
1 The Torpedo Live interface
The Torpedo Live parameters are organized in menus, accessible by different push-buttons and knobs
as seen in
figure 3.2
.
Two 2-function rotary encoders: PRESET/PARAMETER, OUTPUT LEVEL/VALUE
Two push-buttons: SETUP and EDIT/HOLD TO SAVE.
One potentiometer: IN LEVEL.
When pushing a button or turning an encoder, you will see a parameter moving on the display.
2 Input gain control
The IN LEVEL potentiometer controls the input gain of the unit. The Torpedo Live being a digital
product, it is absolutely critical to avoid any saturation of the input signal and avoid the risk of
considerably reducing the audio quality. The input level is controlled by a potentiometer and is the
same for all presets. To get the best sound, try to have the same volume (or close) on all different
sounds coming to the Torpedo Live. This way you won’t have to change the input gain when switching
the channels on your amplifier. If you don’t have individual volume settings on your amplifier
channels, always do the gain setting with the loudest channel.
The input gain adjustment must be done with input signal present at the input selected (speaker or
line input). The input bargraph gives you a visual indication of the input signal amplitude. The upper
red led is on when there is saturation in the input stage: lower the volume of your amplifier output
and/or lower the input gain.
For optimum quality, we advise to keep the peak levels of the input signal
at a maximum of -12dB to -6dB on the bargraph.
3 Three menus: PERFORM, EDIT & SETUP
The Torpedo Live has three different menus, giving you access to different parameters:
