2018/07/25 19:55
13/32
Torpedo Live User's Manual
User's manuals - http://wiki.two-notes.com/
preamp/amp.
An S/PDIF signal contains two audio channels. The Torpedo Live is a mono unit, so we decided to give
a great feature : sending the WET signal (with miking simulation) through the LEFT channel and the
DRY signal (without miking simulation) on the RIGHT. This way you can record the dry and wet signal
simultaneously. Use the Wet signal to play as usual, and the DRY signal from the amp with a plugin
speaker simulator, such as our Torpedo WoS III plugin. You can decide to use both channels to carry
the Wet or the Dry signal, please read about the Output parameter in the Setup menu.
For a working S/PDIF connection, your audio interface must be in slave
mode, while the Torpedo Live is in master mode. Your audio interface must
handle 48KHz and/or 96KHz to properly work with the Torpedo Live. For
more information on your audio interface, please refer to its user manual.
Control the machine from your computer (PC Windows or Mac OSX) with the Torpedo Remote
software in USB. Create, save and load presets, load new cabinets or Impulse Response (IR) files.
Download the Torpedo Remote for free on the
Two notes Audio Engineering
website.
3 On stage
The analog I/O of the Torpedo Live offers great options on stage. For example, the analog output can
be connected to the front mixing console. Or plug headphones to the appropriate output and enjoy
playing your amp LOUD at home in total silence.
In the following figure, you will find a simple setup with an amplifier. The same can be done with a
preamplifier into the LINE INPUT of the Torpedo Live.
