2020/09/07 17:45
23/36
Torpedo Captor X User's Manual
User's manuals - https://wiki.two-notes.com/
Access the tuner by clicking on the fork button at the bottom of the
Room image. The tuner is fully chromatic. You can set the base tuning
point in the Setup Manager anywhere between 410hz and 490hz,
defaults at 440hz.
4.6 Voicing knob
On the front panel of the Torpedo Captor X, the VOICING control allows you to adjust
the global sound of the unit coming out of the XLR outputs. It is a simple one band
equaliser that is centered at 900 Hz with a -12 to +12 dB range.
4.7 MIDI control
Torpedo Captor X can be controlled by MIDI, with any regular MIDI controller. To
control the Torpedo Captor X via MIDI use the supplied MIDI to mini jack converter
cable. You will be able to control any parameters of the Torpedo Captor X through
Control Change, or change presets through Program change. You can see the MIDI
mapping in the section of the owner’s manual.
4.8 Flashing red LED
The Torpedo Captor X is equipped with a red LED to signal the following events or issues with your
Torpedo Captor X:
Clipping of the input or the output stages of the Torpedo Captor X
File transfer with the Remote software
System errors, unrelated to the incoming signal
4.8.1 Clipping the input or output
It is possible to overload the input or output stages of the Torpedo Captor X. The red LED will then
light up, according to the signal. Start by turning the Output Level down. If the LED is still lighting up
when you play, you are clipping the input of the Torpedo Captor X. Engage the IN LEVEL switch
front panel image, element N°7
to the LOW position. It activates a -15dB pad on the input signal. If
the LOW switch is engaged and you are still clipping the input stage of the Captor X, turn down the
volume of the amp until the red LED turns itself off.
With Torpedo remote, you can see the input and output levels through the dedicated vumeters.
