2020/09/07 17:45
21/36
Torpedo Captor X User's Manual
User's manuals - https://wiki.two-notes.com/
On the front panel, the SPACE knob allows you to control one parameter on the fly. You will
assign the behaviour of SPACE in Torpedo Remote, through the purple button below the
SPACE knob in the software.
Here are the different assignment possibilities:
There are two possible behaviours. Either, Twin Tracker is OFF. The SPACE knob is assigned
to the width of the reverb. Or, Twin Tracker is ON. The Space knob is assigned to the
Tightness of the Twin Tracker. The Width of the reverb is automatically set to 100%.
The SPACE Knob is assigned to the Dry/Wet level of the reverb.
4.4.2 Dual Mono Routing
This routing allows you to send independent signals from each XLR outputs. You will be able to set a
different EQ and dry/wet reverb level to the right XLR output. The layout of the Torpedo Remote will
show you an additional EQ next to the right output fader.
4.4.2.1 Additional EQ
