Two Brothers Racing
KLX/DR-Z110 Extended Swingarm
For use with extended shock.
Part # 022-6-36BW
Parts List
Installation Instructions
Qty.
Description
Part Number
1
Extended Aluminum Swingarm
022-6-36BW
2
Pivot Bolt Bushings
2
Pivot Bolt Spacers (Tapered)
2
Chain Tensioner Blocks
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Remove swingarm pivot bolt. Remove swingarm from
frame.
Insert supplied bushings into receivers in pivot end of
new swingarm.
Slide a supplied pivot bolt spacer (tapered end out)
onto the OEM pivot bolt. Attach swingarm to frame
by sliding pivot bolt through attachment points on
swingarm and frame. Place second supplied spacer
onto pivot bolt (tapered end out). Secure with OEM
pivot bolt nut and tighten firmly.
Extended Shock Installation:
You
MUST
use the RaceTech (022-6-09) or Marzocchi
(022-6-54) Extended shock with this swingarm.
6.
7.
8.
9.
IMPORTANT - PLEASE READ CAREFULLY
Warranty
two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read
all instructions first before starting installation. Make sure the vehicle and
exhaust system are completely cool before starting the installation. Also,
make sure the vehicle is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Make sure the bike is completely cool before starting
the installation. Make sure the bike is secure on a
centerstand or ideally a service lift.
Important!
: This swingarm (022-6-36BW) will
NOT
work
with the stock or short-travel shock. You
MUST
use the
RaceTech (022-6-09) or Marzocchi (022-6-54) Extended
shock with this swingarm.
Remove seat. Remove gas tank attachment bolt and
slide tank forward to expose top shock mounting bolt.
Remove upper & lower shock mounting bolts.
Remove chain tensioners, disconnect brake control arm
and allow arm to drop.
1.
2.
3.
4.
5.
