14
§
The setpoints in the image at the bottom of page 13
would spray water for 1.5 seconds every 6 seconds.
Advanced Mode
This button returns the operator to the Advanced Mode screen.
Super User Mode
Super User Mode unlocks additional buttons in Advanced Mode (as
shown in the image to the right) with various functions.
•
The
Hold to SPRAY
button turns on the water
sprayers momentarily.
•
The
SysInfo
button will take you directly to the
System Information Screen from where you can
troubleshoot motor errors quickly.
•
The
Blades REVERSE
button reverses the
direction of the blade motor. This is used for
sharpening new blades. Contact Technical
Support for more information (see technical support details at back of
manual).
Automatic Reset
The
Auto Drive Error Acknowledgement
button resets the motor drive. This feature will
not solve all motor errors. To remove other errors hold both the
EMPTY
and
STOP
buttons
for 3 seconds (see
Troubleshooting
on page 66 if errors do not clear).
Turn on this feature to automatically reset the motor drives.
Tilt Settings
The
Tilt Control
slide bar removes the ability to adjust the machine tilt in Advanced Mode.
•
The
Calibration
button resets the angle reading to 0 (see Recalibrating
the Tilt Sensoron page 62 for calibration procedure).
+/- Button Interval
The boxes in line to the right with
+/- Interval
show the increments the setpoints are
changed when
+/-
buttons are tapped in Advanced Mode. To adjust increments, tap the
boxes and type a new value. The default settings for the incremental changes are:
Summary of Contents for T-ZERO
