6
http://www.jperkinsdistribution.co.uk
Twister Medevac
fliGht pRepaRation
A. FITTING THE FLYBAR
1
2
3
1. The flybar is supplied loose. Carefully snap fit the flybar unit into the mouldings at the top of the
main shaft following the sequence outlined above. The moulded 'flybar locating lugs' must snap into
the matching holes in the 'flybar hub'.
Flybar hub
Flybar locating lug in matching hole
2. The assembled flybar hub unit should look like the above.
3. Snap the plastic flybar link into position on a ball arm as shown above.
The flybar must be free to rock with no friction or sticking!
It should appear to sit 'loosely' in position—double check before proceeding!
