12
http://www.jperkinsdistribution.co.uk
Twister Medevac
B. SWASHPLATE LEVEL CHECK
(MODE 2 TRANSMITTER)
The next stage requires you check control servo operation. Proceed as follows:
Adjust.cyclic.trims.to.level.swashplate.
(Mode.2.transmitter.shown)
The helicopter swashplate should be horizontal when viewed from the front and from the side of the
helicopter. If it is not, adjust it's position by operating the cyclic trims. See pics above.
The ball joints snapped to the swashplate can be unsnapped and screwed/unscrewed if further adjustment
is needed after the model has flown.
C. SWASHPLATE ROLL CHECK
(MODE 2 TRANSMITTER)
Roll cyclic - Move the transmitter roll (aileron) stick to the left.
The swashplate will tilt as indicated above.
