Twister 400 SPORT V2, Assembly & Flight Training Manual

Page: 8 / 24

8
http://www.jperkinsdistribution.co.uk
C. HELICoPtER CoNNECtoRS
Familiarise yourself with the connectors below but do not connect anything yet!
Battery connector
White charging connector
ESC connector
helicopteR chaRGinG inStRuctionS
Note: Your helicopter is fitted with a high power lithium polymer battery (lipo). Charge
the lipo battery in your Twister 400 Sport V2 before use.
▼
1.
Carefully connect the POLARISED white charge plug on the heli to the charger
ensuring it is the correct way around. You should not need to force it. See below.
WARNING: Do not force the charging connector into the charger socket!
Make sure the helicopter is switched off and the battery connector is disconnected
from the ESC connector as per the picture above.
▼
2.
Insert the AC power supply lead into the end of the 12V charger and switch on.
During the charging process power, the red LED will light.
The battery is fully charged when the green LED lights. This may take up to 120
minutes.