Twister 400 SPORT V2, Assembly & Flight Training Manual

Page: 10 / 24

10
http://www.jperkinsdistribution.co.uk
f
Do NOT use water to put out a lipo fire!
Using your LiPo battery
f
Do not modify/change any part of the battery or lead. Do not remove its
protective covering. Removal or modification may damage the battery and will
invalidate any warranty claim.
f
Do not place this battery near fires or any high temperature object.
f
Do not store batteries in any type of motor vehicle.
f
Do not let the battery get wet or become submerged in any type of liquid.
f
Do not carry loose batteries in your pocket or bag as they could short-circuit
against other items.
f
If you should get electrolyte from the cells on your skin, wash thoroughly with
soap and water. If in your eyes, rinse thoroughly with water. Seek medical
assistance.
beGinneR and adVanced mode
The Twister 400 Sport V2 transmitter features a beginner/advanced mode button.
Advanced mode with LED lit makes the Twister 400 Sport V2 more responsive and
should only be used by experienced pilots.
fliGht pRepaRation
A. SWItCHING oN
▼
1. Identify the polarised ESC and battery connectors below. Identify the transmitter
ON/OFF switch and make sure the throttle stick is down, in its lowest position.
Battery
connector
ESC connector
▼
3. Align the polarised ESC and battery connectors and carefully push them together
taking great care to connect the correct way round, red to red and black to
black. Do not try to force a connection as you will damage the heli and/or the
battery if you do. If it will not connect, check polarity and try again.
Switch on the transmitter.