background image

Ready to fly 4 channel R/c helicopteR

Assembly & Flight Training guide

V1.0

SpecificationS

Main rotor diameter..................................................... 400mm

Helicopter length.......................................................... 430mm

Flying weight (excl. trainer undercart) ............around 250g

R/C transmitter......................................... Twister 400 2.4GHz 

Cyclic steering ..................................hi-torque micro servos

On-board electronic control........3-in-1 receiver/ESC/gyro

On-board power ........... 7.4V 700mAh Li-polymer (with cell 

balancer lead)

Flight time per charge ........................... around 8-9 minutes 

Kit contentS

Twister 400 Sport V2 ready-built helicopter .......................1

Twister 400 Sport V2 2.4GHz transmitter .............................1

Twister 7.4V lithium polymer battery pack ..........................1

Twister Lithium polymer 12V DC balancer charger ...........1

Twister 400 mains power supply ..........................................1

Twister 400 Sport V2 instruction manual .............................1

FREE training undercart .................................................. 1 set

RequiRed but not Supplied

AA transmitter batteries ........................................................6

Small crosshead screwdriver ...............................................1

Summary of Contents for 400 SPORT V2

























Reviews: